Guardian I- Model G1384-B- Mechanical Residential Fire Suppression System, w/Fusible Links, w/Electric Contactor Enclosure, (for Electric Stoves)

Operation:
Mechanical
Coverage:
Electric and Gas Ranges may not exceed a width of 36” wide x 24” deep or 864 sqi.
Hood:
Any standard residential hood with a single light and fan in the center that meets the same range size requirements. The bottom of the hood cannot exceed 30” from the range top.
Nozzles:
The nozzle tip must be at least 18” above the range with a maximum of 28”.

The system can also be wired into an existing alarm panel showing system activation.
PLEASE NOTE: This system will require an electrician to install the included electrical contactor enclosure. This will allow the electric stove to be shut off in the event of a system activation and discharge.

Specifications

Range:

Electric Ranges may not exceed a width of 36” wide x 24” deep or 864 sqi.

Hood:

Any standard residential hood with light and fan that meets the same range size requirements. The bottom of the hood cannot exceed 30” from the range top.

Nozzles: The nozzle tip must be at least 18” above the range with a maximum not to exceed 28”. Fusible Links: Distance from the detection links to the range top shall not exceed 26 1/2”.

Fuel Shutoff:

Each system is UL-listed with a gas or electric fuel shutoff. This Guardian 1384B Residential Fire System will require a licensed electrician to make the connection for the supplied microswitch for electrical shutoff.

See owner's installation manual 71758-B dated May 1, 2011, revised September 1, 2012. For complete system applications and limitations.

Fire Fighter Products, Inc. does not endorse or recommend a specific hood manufacturer. The range hoods provided below are simply for reference purposes as a guide to better understand the different types of hoods, and how they are compatible with each Guardian installation. For additional information please contact our office at 1-800-359-3473.

Hood Compatibility Reference Chart

Guardian Systems Technical Support Questions- Please call 800-359-3473 ph

Important Notice: Due to manufacturer restrictions, we are unable to ship to any U.S. freight forwarder addresses. Additionally, we cannot provide EXW (Ex Works) documentation or details for these products.